Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Antworten
lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Mittwoch 26. Oktober 2016, 17:00

Hello,
I bought an oscilloscope USB Oscilloscope Hantel 6022BL.
He wanted me to cooperate with PROFILAB Expert, but does not know how to program.
if someone could create a dll?

PLEASE

oryginal examples file for VB, VC, LabView:
https://drive.google.com/open?id=0B7JUH ... XRHT1puZVU

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Freitag 28. Oktober 2016, 10:34

Hi,
before anything else: could you please provide the Manual (EN) here? (NOT Google etc.)
Because the provided Driver (Hantek) will probably do (if it is VCP = virtual COM Port).
++++++
Gruss/regards IKT

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Samstag 29. Oktober 2016, 16:06

Im sorry for my english. This is all files for my oscilloscope.
this archive is on the google drive, because size its higher than 256kb. I can send to mail. Please help.

https://drive.google.com/open?id=0B7JUH ... TFNUDBfM00

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Sonntag 30. Oktober 2016, 13:06

There is insufficient information about the installed drivers, in the Manual ...

The Oscilloscope has to be connected to the PC before opening Device Manager.
Can you please post the output (Screen-Shot) of the Device Manager here?
++++++
Gruss/regards IKT

abacom
Site Admin
Beiträge: 3917
Registriert: Dienstag 23. September 2008, 10:54
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von abacom » Dienstag 1. November 2016, 09:39

Most likely the device can only be accessed with the manufactures DLL-API.
ABACOM support

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Dienstag 1. November 2016, 15:09

Hi,

This is a photo on driver for my hantek oscilloscope.
Detected as only hardware (not virtual com port)
how running example for Visual Basic, or Lab View ? (Examples sources)
Dateianhänge
screen.PNG
screen.PNG (35.2 KiB) 11841 mal betrachtet

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Dienstag 1. November 2016, 16:16

Hi,
Detected as only hardware (not virtual com port)
I'm not so certain about that, can you check (click the +) left of *Porty (COM i LPT)*, to see what's in there?
BTW: You should "disable" the faulty PCI-Modem (or get it to work properly).
++++++
Gruss/regards IKT

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Dienstag 1. November 2016, 16:25

This all my hardware.

BTW: My modem is disabled - thanks ;)
Dateianhänge
screen2.PNG
screen2.PNG (21.67 KiB) 11829 mal betrachtet

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Dienstag 1. November 2016, 16:28

I think your VCP may be connected on COM1.
However, I don't understand the comment next to it???
Or are you saying your Laptop has a real, physical RS232 Port (HW)?
++++++
Gruss/regards IKT

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Dienstag 1. November 2016, 16:35

My laptop its a very old.
Com1 port its a original physical hardware port.

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Dienstag 1. November 2016, 16:43

OK. I get it. Just explain the reason, why you need/want to use it in PL.
There is a Software (from Hantek) provided for using the scope.

Coding DLL's is a Time consuming Task ...
Almost impossible without the HW (for Tests).
++++++
Gruss/regards IKT

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Dienstag 1. November 2016, 16:52

I do not want to make trouble.
I would like to do Register voltage. Original software not supportet for voltage tools :(
Only Oscilloscope and logic analizer.

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Dienstag 1. November 2016, 16:59

I don't understand (probably a language problem), Voltage can be seen on Oscilloscope (using the correct scaling, of course).

Or do you mean: record (Register) Voltage??
++++++
Gruss/regards IKT

lukg20
Beiträge: 14
Registriert: Dienstag 25. August 2015, 11:48
Wohnort: Poland/Bielsko-Biała
Kontaktdaten:

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von lukg20 » Dienstag 1. November 2016, 17:08

Im sorry...
As for the recorder voltage

IKT
Beiträge: 554
Registriert: Mittwoch 4. November 2009, 18:32

Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab

Beitrag von IKT » Dienstag 1. November 2016, 17:22

To do that, it's probably cheaper and easyer, to use a DMM (digital multi meter) connected to PL.
See Voltcraft VC Series, with RS232 Connector (straight connection to COM1, no Drivers needed), available: Conrad.

To see the complete List of compatible DMM's see HW-Compatibility-List (in PL, click ? in Menu) and use DMM as "Manufacturer" to shorten the List.

It seems, that you've got yourself the wrong Instrument, for the planned Task.
++++++
Gruss/regards IKT

Antworten

Zurück zu „Haussteuerungen“