Cut out area
Verfasst: Donnerstag 25. September 2008, 15:12
p.erasmus
Anmeldungsdatum: 15.01.2007
Beiträge: 85
Verfasst am: 18.12.2007 21:36 Titel: Cut out area
--------------------------------------------------------------------------------
Dear Abacom / Users
I have read the Help files and can not find any information on creating a cut out area on a PCB ,
I need to have a certain shape cutout in my PCB
Please help on the method to use
Thanks
Peter
_________________
P.Erasmus
Automotive Engineering
http://www.wenko.ch
Switzerland
Nach oben
abacom
Site Admin
Anmeldungsdatum: 30.06.2006
Beiträge: 898
Verfasst am: 19.12.2007 09:08 Titel:
--------------------------------------------------------------------------------
Dear Peter,
the cutout-area only works on the automatic ground plane. You can place e.g. a track on the ground plane, and then select the option "cutout-area" for this track. If you deselect this track you will see, that the track will "cutout" the ground plane.
ABACOM support
Anmeldungsdatum: 15.01.2007
Beiträge: 85
Verfasst am: 18.12.2007 21:36 Titel: Cut out area
--------------------------------------------------------------------------------
Dear Abacom / Users
I have read the Help files and can not find any information on creating a cut out area on a PCB ,
I need to have a certain shape cutout in my PCB
Please help on the method to use
Thanks
Peter
_________________
P.Erasmus
Automotive Engineering
http://www.wenko.ch
Switzerland
Nach oben
abacom
Site Admin
Anmeldungsdatum: 30.06.2006
Beiträge: 898
Verfasst am: 19.12.2007 09:08 Titel:
--------------------------------------------------------------------------------
Dear Peter,
the cutout-area only works on the automatic ground plane. You can place e.g. a track on the ground plane, and then select the option "cutout-area" for this track. If you deselect this track you will see, that the track will "cutout" the ground plane.
ABACOM support