Velleman: K8055 / P8055-1 2003
Verfasst: Mittwoch 3. März 2010, 23:52
Ich hab die mal geschenkt gekriegt, heute mal zusammen gelötet.
Aber auf USB2 Computer scheint die total nicht zu funktionieren.
GeräteManager: Code10 (Gerät konnte nicht gestartet werden)
Versuche: Bios auf USB1.0 geschaltet, win2k installiert, andere computer (auch usb2.0)
In linux ist es eigentlich definitiv:
3.
[ 105.150026] usb 4-3: new low speed USB device using ohci_hcd and address 2
4.
[ 105.369344] usb 4-3: device descriptor read/all, error -62
5.
[ 105.552007] usb 4-3: new low speed USB device using ohci_hcd and address 3
6.
[ 105.773403] usb 4-3: unable to read config index 0 descriptor/start: -62
7.
[ 105.773408] usb 4-3: chopping to 0 config(s)
8.
[ 105.778546] usb 4-3: string descriptor 0 read error: -62
9.
[ 105.778664] usb 4-3: no configuration chosen from 0 choices
10.
[ 105.778701] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
11.
[ 105.778704] usb 4-3: USB disconnect, address 3
12.
[ 106.121287] usb 4-3: new low speed USB device using ohci_hcd and address 4
13.
[ 106.340828] usb 4-3: device descriptor read/all, error -62
14.
[ 106.531283] usb 4-3: new low speed USB device using ohci_hcd and address 5
15.
[ 106.751051] usb 4-3: device descriptor read/all, error -62
16.
[ 106.941298] usb 4-3: new low speed USB device using ohci_hcd and address 6
17.
[ 106.983151] usb 4-3: device descriptor read/all, error -62
18.
[ 107.180056] usb 4-3: new low speed USB device using ohci_hcd and address 7
19.
[ 107.221276] usb 4-3: device descriptor read/all, error -62
20.
[ 107.231307] hub 4-0:1.0: unable to enumerate USB device on port 3
Bei 50maligen Aus/Einstecken des USB Kabel kriegt man dann mal zufällig die Karte ans laufen USB technisch. Jedoch auch nur so für 1 bis 5min.
Ich glaub das der PIC nicht kompatible ist mit USB2 Chips der heutigen Generation und dessen protokoll.
Naja, pech gehabt.
Alle I/O Test (Analog wie Digital erfolgreich) konnte ich machen, wenn ich sie mal online bekamm.
Das einzige wo ich sähe den PIC neu zu flashen, wenn der Hersteller was hätte, leider nicht. Dammich. So ein USB Flash wird es nicht geben
Und dann ist der PIC mit 6Mhz getaktet, würde man doch meinen, man würde USB2 hinkriegen, oder mindestens im Protokoll ne korrektur, aber da ist nichts bei Velleman Download, scheinbar unbekannt das Problem. Oder man intressiert sich nicht für das.
Aber auf USB2 Computer scheint die total nicht zu funktionieren.
GeräteManager: Code10 (Gerät konnte nicht gestartet werden)
Versuche: Bios auf USB1.0 geschaltet, win2k installiert, andere computer (auch usb2.0)
In linux ist es eigentlich definitiv:
3.
[ 105.150026] usb 4-3: new low speed USB device using ohci_hcd and address 2
4.
[ 105.369344] usb 4-3: device descriptor read/all, error -62
5.
[ 105.552007] usb 4-3: new low speed USB device using ohci_hcd and address 3
6.
[ 105.773403] usb 4-3: unable to read config index 0 descriptor/start: -62
7.
[ 105.773408] usb 4-3: chopping to 0 config(s)
8.
[ 105.778546] usb 4-3: string descriptor 0 read error: -62
9.
[ 105.778664] usb 4-3: no configuration chosen from 0 choices
10.
[ 105.778701] hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
11.
[ 105.778704] usb 4-3: USB disconnect, address 3
12.
[ 106.121287] usb 4-3: new low speed USB device using ohci_hcd and address 4
13.
[ 106.340828] usb 4-3: device descriptor read/all, error -62
14.
[ 106.531283] usb 4-3: new low speed USB device using ohci_hcd and address 5
15.
[ 106.751051] usb 4-3: device descriptor read/all, error -62
16.
[ 106.941298] usb 4-3: new low speed USB device using ohci_hcd and address 6
17.
[ 106.983151] usb 4-3: device descriptor read/all, error -62
18.
[ 107.180056] usb 4-3: new low speed USB device using ohci_hcd and address 7
19.
[ 107.221276] usb 4-3: device descriptor read/all, error -62
20.
[ 107.231307] hub 4-0:1.0: unable to enumerate USB device on port 3
Bei 50maligen Aus/Einstecken des USB Kabel kriegt man dann mal zufällig die Karte ans laufen USB technisch. Jedoch auch nur so für 1 bis 5min.
Ich glaub das der PIC nicht kompatible ist mit USB2 Chips der heutigen Generation und dessen protokoll.
Naja, pech gehabt.
Alle I/O Test (Analog wie Digital erfolgreich) konnte ich machen, wenn ich sie mal online bekamm.
Das einzige wo ich sähe den PIC neu zu flashen, wenn der Hersteller was hätte, leider nicht. Dammich. So ein USB Flash wird es nicht geben
Und dann ist der PIC mit 6Mhz getaktet, würde man doch meinen, man würde USB2 hinkriegen, oder mindestens im Protokoll ne korrektur, aber da ist nichts bei Velleman Download, scheinbar unbekannt das Problem. Oder man intressiert sich nicht für das.