Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Hello,
I bought an oscilloscope USB Oscilloscope Hantel 6022BL.
He wanted me to cooperate with PROFILAB Expert, but does not know how to program.
if someone could create a dll?
PLEASE
oryginal examples file for VB, VC, LabView:
https://drive.google.com/open?id=0B7JUH ... XRHT1puZVU
I bought an oscilloscope USB Oscilloscope Hantel 6022BL.
He wanted me to cooperate with PROFILAB Expert, but does not know how to program.
if someone could create a dll?
PLEASE
oryginal examples file for VB, VC, LabView:
https://drive.google.com/open?id=0B7JUH ... XRHT1puZVU
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Hi,
before anything else: could you please provide the Manual (EN) here? (NOT Google etc.)
Because the provided Driver (Hantek) will probably do (if it is VCP = virtual COM Port).
before anything else: could you please provide the Manual (EN) here? (NOT Google etc.)
Because the provided Driver (Hantek) will probably do (if it is VCP = virtual COM Port).
++++++
Gruss/regards IKT
Gruss/regards IKT
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Im sorry for my english. This is all files for my oscilloscope.
this archive is on the google drive, because size its higher than 256kb. I can send to mail. Please help.
https://drive.google.com/open?id=0B7JUH ... TFNUDBfM00
this archive is on the google drive, because size its higher than 256kb. I can send to mail. Please help.
https://drive.google.com/open?id=0B7JUH ... TFNUDBfM00
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
There is insufficient information about the installed drivers, in the Manual ...
The Oscilloscope has to be connected to the PC before opening Device Manager.
Can you please post the output (Screen-Shot) of the Device Manager here?
The Oscilloscope has to be connected to the PC before opening Device Manager.
Can you please post the output (Screen-Shot) of the Device Manager here?
++++++
Gruss/regards IKT
Gruss/regards IKT
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Most likely the device can only be accessed with the manufactures DLL-API.
ABACOM support
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Hi,
This is a photo on driver for my hantek oscilloscope.
Detected as only hardware (not virtual com port)
how running example for Visual Basic, or Lab View ? (Examples sources)
This is a photo on driver for my hantek oscilloscope.
Detected as only hardware (not virtual com port)
how running example for Visual Basic, or Lab View ? (Examples sources)
- Dateianhänge
-
- screen.PNG (35.2 KiB) 12509 mal betrachtet
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Hi,
BTW: You should "disable" the faulty PCI-Modem (or get it to work properly).
I'm not so certain about that, can you check (click the +) left of *Porty (COM i LPT)*, to see what's in there?Detected as only hardware (not virtual com port)
BTW: You should "disable" the faulty PCI-Modem (or get it to work properly).
++++++
Gruss/regards IKT
Gruss/regards IKT
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
This all my hardware.
BTW: My modem is disabled - thanks
BTW: My modem is disabled - thanks
- Dateianhänge
-
- screen2.PNG (21.67 KiB) 12497 mal betrachtet
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
I think your VCP may be connected on COM1.
However, I don't understand the comment next to it???
Or are you saying your Laptop has a real, physical RS232 Port (HW)?
However, I don't understand the comment next to it???
Or are you saying your Laptop has a real, physical RS232 Port (HW)?
++++++
Gruss/regards IKT
Gruss/regards IKT
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
My laptop its a very old.
Com1 port its a original physical hardware port.
Com1 port its a original physical hardware port.
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
OK. I get it. Just explain the reason, why you need/want to use it in PL.
There is a Software (from Hantek) provided for using the scope.
Coding DLL's is a Time consuming Task ...
Almost impossible without the HW (for Tests).
There is a Software (from Hantek) provided for using the scope.
Coding DLL's is a Time consuming Task ...
Almost impossible without the HW (for Tests).
++++++
Gruss/regards IKT
Gruss/regards IKT
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
I do not want to make trouble.
I would like to do Register voltage. Original software not supportet for voltage tools
Only Oscilloscope and logic analizer.
I would like to do Register voltage. Original software not supportet for voltage tools
Only Oscilloscope and logic analizer.
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
I don't understand (probably a language problem), Voltage can be seen on Oscilloscope (using the correct scaling, of course).
Or do you mean: record (Register) Voltage??
Or do you mean: record (Register) Voltage??
++++++
Gruss/regards IKT
Gruss/regards IKT
-
- Beiträge: 14
- Registriert: Dienstag 25. August 2015, 11:48
- Wohnort: Poland/Bielsko-Biała
- Kontaktdaten:
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
Im sorry...
As for the recorder voltage
As for the recorder voltage
Re: Hantek 6022BL USC Oscilloscope - DLL for ProfiLab
To do that, it's probably cheaper and easyer, to use a DMM (digital multi meter) connected to PL.
See Voltcraft VC Series, with RS232 Connector (straight connection to COM1, no Drivers needed), available: Conrad.
To see the complete List of compatible DMM's see HW-Compatibility-List (in PL, click ? in Menu) and use DMM as "Manufacturer" to shorten the List.
It seems, that you've got yourself the wrong Instrument, for the planned Task.
See Voltcraft VC Series, with RS232 Connector (straight connection to COM1, no Drivers needed), available: Conrad.
To see the complete List of compatible DMM's see HW-Compatibility-List (in PL, click ? in Menu) and use DMM as "Manufacturer" to shorten the List.
It seems, that you've got yourself the wrong Instrument, for the planned Task.
++++++
Gruss/regards IKT
Gruss/regards IKT